For sale: 2005 GTi 180 206 Peugeot

The GTS2 was fitted with the RB30E engine, which was essentially the same engine block as applied to the standard GXE model. Naturally, a number of modifications were made to the GTS2 engines and ancillaries (including improvements over the GTS1 engine) to ensure a substantial power increase occurred. See the mechanical features section of this guide for specific details.

Engine number format:

The RB30E engine will have a number in the format: 1#####A

The engine so far sighted for GTS2 vehicles have been between 176000A and 179000A, however, there may be exceptions and further data will need to be collected to comprehensively make any conclusion.

Engine number location:

The engine number on the RB30E is provided in two locations:

1. Stamped into a small flat area on the inlet side (driver's side) of the engine block. This small flat area is located toward the front of the block, slightly lower and forward of the oil filter. Below the engine number, "RB30" will be cast into the engine block.
2. Embossed on the vehicle's Nissan build plate.

Transmission specification:

The original transmission in a GTS2 will be confirmed by the vehicle's model number, located on the Nissan build plate. This number will read as CJR31FGTS or CJR31AGTS. The relevant digit for the transmission specification is digit 6: (F = 5-speed manual, A = 4-speed automatic).